Tank lock actuator

Technical parameters:

1: standard voltage: DC12V: working voltage: 9v-16v

2: locked rotor current Imax ≤ 4A

3. Working angle: 16 ° ± 2 °

4: output torque ≥ 0.65n. M

5. Service life: ≥ 50000 open close cycles

6. For others, refer to (QC / t627-2013) standard for electric door lock device of automobile.

Performance features:

1. The turbine return is normal without jamming, jamming, impact, transmission balance, low noise, normal noise ≤ 75db.

2. Screw in torque of mounting hole ≤ 10kgf.cm

3. The actuator has PTC protection function.

Applicable models:

Brilliance, China

• Door smart actuator 1

  Technical requirements:1. Rated voltage: 12V DC, working voltage: dc9v-16v;2. Working temperature: - 40 ° C to + 80 ° C;3. Noise requirements: motor noise ≤ 60dB, actuator assembly noise ≤ 55dB;4. According to the requirements of durable DVP of VM ase1 actuator, the service life shall be ≥ 100000 times;5. The pull stroke of the actuator is 32.5 (+ 2 / 0) mm, and the extension and contraction time is 1200 × 0001 × 0002 × 200ms;The product is delivered with the pull rod extending 32.5mm;6. Measured locked rotor force of actuator is more than 160n;7. The actuator rotates ...
• Door smart actuator 2

  Technical requirements:1. Rated voltage: 12V DC, working voltage: dc9v-16v;2. Working temperature: - 40 ° C to + 80 ° C;3. Noise requirements: motor noise ≤ 60dB, actuator assembly noise ≤ 55dB;4. According to the requirements of durable DVP of VM ase1 actuator, the service life shall be ≥ 100000 times;5. The pull stroke of the actuator is 32.5 (+ 2 / 0) mm, and the extension and contraction time is 1200 × 0001 × 0002 × 200ms;The product is delivered with the pull rod extending 32.5mm;6. Measured locked rotor force of actuator is more than 160n;7. The actuator rotates ...
• Door smart actuator 3

  Technical requirements:1. Nominal voltage 13.5V, power on time 500ms, reset time 2s,2. Output force under nominal voltage ≥ 200N.3. Room temperature durability 30000 times, 1 cycle per minute4. Meet the requirements of GB / t30512-2014
• Side door actuator

  Technical parameters:1: standard voltage: DC12V: working voltage: 9v-16v2: locked rotor current Imax ≤ 4A3. Working angle: 26 ° ± 2 °4: output torque ≥ 0.65n. M5. Service life: ≥ 50000 open close cycles6. Others refer to (QC / t627-2013 standard for electric door lock device of automobilePerformance features:1. The turbine return is normal without jamming, jamming, impact, transmission balance, low noise, normal noise ≤ 75db.2. The space for the swing arm output to cooperate with the mechanical body is small.3. The actuator has PTC protection function.Applicable models:BYD, Geel...